Skip to main content
4.5 Rated on Trustpilot

Teardrop Flags

Teardrop Beachflag-catalog-image
  • Washable
  • Suitable for rough weather conditions
  • The material is slightly transparent, resulting in the print showing in reverse on the back
Type: Flag with pole system of fiberglass and bag
Type
Size: Flag with pole: 100 x 300 cm / Flag only: 100 x 250 cm
Size
Material: Recycled RPET Material / 110 gsm
Material
Colours: Black
Colours
Option: No flag base
Option

Print run

Delivery

Upload and approve your files before: Monday, 23 November 2026 15:00

Excl. VAT
Incl. VAT
€59.99 Excl. VAT
1 × Flag with pole system of fiberglass and bag · Flag with pole: 100 x 300 cm · Recycled RPET Material · Black · No flag base
€59.99 / piece Excl. VAT

How would you like to add your design?

We'll check your file before printing

Want extra assurance? Add a Premium or Deluxe artwork check at cart.

About Teardrop Flags

Teardrop flags put your logo up high outside your café. The rounded top works like a frame, so guests spot your brand before they reach the door. Set one by the entrance to show people the way in. Choose your size and base, then order online.
Note: The pole band runs down the left of your print as standard, as in the pictures. A band on the right is possible on request. Compare every shape in our Beach Flag Printing range.

Specifications

Property Value
Material Standard flag material: Polyester
Windproof material: Mesh polyester
RPET 110 gsm
Pole Fiberglass
Print Single-sided | Full colour
Wash instructions Machine wash at a maximum of 30°c
Size 2 sizes available
Print technique Sublimation
Weather conditions Can withstand storms and rain. It is recommended to take inside with wind force 7 or higher.
Quantity Possible to order from 1 piece
Transparency 95% see through

Design templates

Size Download
Guide PDF
Teardrop flag - Small (70 x 180 cm) PDF Indesign
Teardrop flag - Large (100 x 250 cm) PDF Indesign
Teardrop Flag - 58 x 171 PDF Indesign
Teardrop Flag - 69 x 202 PDF Indesign
Teardrop Flag - 83 x 240 PDF Indesign
Teardrop Flag - 100 x 352 PDF Indesign

FAQs

Will my logo fit the rounded top of a teardrop flag?

Small prints at 70 x 180 cm and Large at 100 x 250 cm. The rounded top is the widest part, so a round or square logo sits there in full. For a wide logo, stack the name under the symbol. A long slogan belongs on our Rectangle Beach Flags.

Do I need a drop pole as well as the printed flag?

Only if you have no drop pole yet. The fibreglass set fits both sizes, with the flag, a carry bag and a drop pole of about 2 cm. That pole gives the teardrop outline and bends with the wind. Just the flag comes without a base.

What holds a teardrop flag on grass or soft ground outside a venue?

On grass, sand or clay, the plastic screw base with rotator holds both sizes. The rotator turns your logo with the wind. For firm earth there is the chromed steel ground spike, 50 cm long, best with the Small flag. Never push it into paving or sand.

Which base holds the round-top flag on paving or indoors?

Both drop sizes stand on the parasol base on paving or uneven ground, filled with 10 litres of water or sand. It has a rotator too. For an indoor floor, there is the cross foot. Add its water bag outside on level ground in light wind.

Can a drop flag with my logo hang above a café door?

Yes. You can mount it with a wall bracket at 0°, 45° or 90°. At 90° your logo hangs out over the door. At 45° it tilts upwards. You need the fibreglass set for any bracket, and brackets fit most surfaces.

Longlife or recycled fabric for a logo in strong colours?

For bright logo colours, take recycled PET. This polyester comes from 100% recycled PET bottles and is double-stitched at the hem. Longlife, a lightly perforated mesh, stands up to wind better and has a hot-cut edge that hardly frays. Its colours come out a little softer.

Is my logo printed on both sides of a drop flag?

Only one side is printed, by sublimation, and about 95% shows through, so the back shows your logo mirrored. Turn the printed side to the street. Two-sided print is not offered. The band, white or black, stays unprinted. Colours on fabric look softer than on screen, especially black.

How long does the printed drop last outdoors?

A drop flag lasts about 3 to 4 months of intensive outdoor use, longer if you bring it in during bad weather. Always take it in from wind force 7. When you set it up, pull the flag right through the tunnel, so the logo area stays flat.