Akylite

• 
  3.5 mm

  3 mm | 3.5 mm (panelscorrex) is the thin corrugated plastic (Correx) panel, supplied at 3 to 3.5 mm. It is light and weatherproof, well suited to short-term outdoor signage and site boards.

Have a question? Feel free to contact us .

• 
  Clean cutting

  Rectangle (clean cut): your board is trimmed straight into a standard rectangle or square at the chosen size. This is the most affordable and fastest shape, suitable for most uses.
• 
  Contour cut to any shape

  Contour cut: your board is cut to any shape you want instead of a standard rectangle. It follows the outline of your design, such as a logo or figure, for an eye-catching result.

Have a question? Feel free to contact us .

• 
  Single-sided

  Single-sided: your design is printed only on the front of the Foamex board. The back stays unprinted. Suitable when the sign is mounted against a wall or seen from one side only.

Have a question? Feel free to contact us .

• 
  No holes

  Your sign will be cut to the exact size you request. Without drill holes.
• 
  2 holes in upper corners

  The holes in the upper corner will be positioned 15 mm from the edge and the diameter of the drilled holes is 5 mm. This finish is most preferable for hanging your sign from a ceiling.
• 
  4 holes in the corners

  The holes in all the corners will be positioned 15 mm from the edge and the diameter of the drilled holes is 5 mm. This finish is most preferable to mount your sign on a wall.

Have a question? Feel free to contact us .