Bandiere a goccia

• 
  Solo bandiera

  Only the Flag: you receive just the printed flag fabric, without a pole or base. Choose this if you already have a suitable pole and base, or want to replace the fabric.
• 
  Bandiera con asta in vetroresina e borsa

  Flag with fiberglass pole and bag: a complete set with a flexible fiberglass pole. The pole bends with the wind so the flag flies smoothly. Suited to outdoor use in changeable wind.

Hai una domanda? Non esitare a contattarci .

• 
  Recycled RPET Material

  Polyester material made from 100% recycled PET bottles. The material has a fine structure, is wind-permeable and is hemmed to prevent fraying. The colours on RPET material are bright and slightly glossy.
• 
  Mesh fabric

  This polyester material is slightly perforated, making it more wind-resistant than recycled RPET material. Mesh fabric flags are not hemmed, hardly fray and therefore optically last longer. The colours on this material are somewhat matt.

Hai una domanda? Non esitare a contattarci .

• 
  Nero

  Black tunnel band: the tunnel band is the fabric sleeve along the side of the flag that the pole slides through. The band is black by default and stands out less on dark designs. On light designs a black band may show through.
• 
  Bianco

  White tunnel band: the tunnel band is the fabric sleeve along the side of the flag that the pole slides through. A white band stands out less on light designs and blends with a light background.

Hai una domanda? Non esitare a contattarci .

• 
  Bandiera senza base

  No flag base: you receive the flag without a base. Choose this if you already have a suitable base or want to mount the flag in another way.
• 
  Piede a croce

  The cross foot is a standard that is suitable for flat surfaces. The metal frame and the four legs will provide extra strength. The cross foot has a size of 85 x 85 cm (20 cm high).
• 
  Piede a croce + borsa d'acqua

  Looking for some extra reinforcement of your crossfoot base? Our Waterbag is what you need! Thanks to it, your beachflag will stay still in front of light wind. Just fill it with water and add it to your cross foot base, and you're ready to take your beachflag outside!
• 
  Base per ombrellone + girevole

  These parasol bases can be used on both stable and unstable surfaces and are a popular option for holding flags in place. They are simple to setup and their weights can be easily increased by adding water or sand.
• 
  Picchetto metallico

  This metallic ground spike is a great accessory to use with your custom printed flags! It is constructed from steel and is perfect for displaying your brand at outdoor festivals and shows.
• 
  Punta a vite in plastica + girevole

  A high-quality plastic screw base that comes equipped with a rotating pin to keep your beachflag turning in all wind conditions. Our bases are ideal for use in soft ground, sand, grass, or clay and can be used with beachflags of any size or type!
• 
  Sospensore parete 45º

  Wall suspension 45°: a wall bracket that holds the pole at a 45° angle so the flag projects diagonally upward from the wall. Suited to an eye-catching placement on a wall or pillar.
• 
  Sospensore parete 90°

  Wall suspension 90°: a wall bracket that holds the pole at a 90° angle so the flag projects horizontally from the wall. Suited to placing the flag clearly above an entrance or along a facade.

Hai una domanda? Non esitare a contattarci .